Prosoft-technology MVI56E-DNPNET Manual do Utilizador descarregar pdf (Página 53)

MVI56E-DNPNET ♦ ControlLogix Platform Contents

DNPNET Ethernet Client/Server Communication Module User Manual

ProSoft Technology, Inc. Page 53 of 140

February 13, 2015

5 Click CIP PATH EDIT to open the CIPconnect Path Editor dialog box.

The CIPconnect Path Editor allows you to define the path between the PC and the MVI56E-

DNPNET module. The first connection from the PC is always a 1756-ENBT (Ethernet/IP)

module.

Each row corresponds to a physical rack in the CIP path.

 If the MVI56E-DNPNET module is located in the same rack as the first 1756-ENBT

module, select RACK NO. 1 and configure the associated parameters.

 If the MVI56E-DNPNET is available in a remote rack (accessible through ControlNet or

Ethernet/IP), include all racks (by using the ADD RACK button).

Parameter

Description

Source Module

Source module type. This field is automatically selected

depending on the destination module of the last rack (1756-

CNB or 1756-ENBT).

Source Module IP Address

IP address of the source module (only applicable for 1756-

ENBT)

Source Module Node Address

Node address of the source module (only applicable for 1756-

CNB)

Destination Module

Select the destination module associated to the source module

in the rack. The connection between the source and destination

modules is performed through the backplane.

Destination Module Slot Number

The slot number where the destination MVI56E module is

located.

To use the CIPconnect Path Editor, follow these steps.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 139 140

Sem comentários

Prosoft-technology MVI56E-DNPNET Manual do Utilizador Página 53