Prosoft-technology MVI56E-DNPNET Manual do Utilizador descarregar pdf (Página 33)

MVI56E-DNPNET ♦ ControlLogix Platform Contents

DNPNET Ethernet Client/Server Communication Module User Manual

ProSoft Technology, Inc. Page 33 of 140

February 13, 2015

Tag Name

Range

Description

DNPNET.CONFIG.DNP3_Ser

ver. Spare1_Always_2

0 to 255 retries

Maximum number of retries at the Data Link

level to obtain a confirmation. If this value is

set to 0, retries are disabled at the data link

level of the protocol. This parameter is only

used if the frame is sent with confirmation

requested.

DNPNET.CONFIG.DNP3_Ser

ver.App_Layer_Confirm_Tout

1 to 32767

milliseconds

Event data contained in the last response may

be sent again if not confirmed within the

millisecond time period set. If application layer

confirms are used with data link confirms,

ensure that the application layer confirm

timeout is set long enough.

DNPNET.CONFIG.DNP3_Ser

ver.Unsolicited_Response

0 or 1

If set to 0, the server will not send unsolicited

responses. If set to 1, the server will send

unsolicited responses.

DNPNET.CONFIG.DNP3_Ser

ver.Class_1_Unsol_Resp_Min

1 to 255 events

Minimum number of events in Class 1 required

before an unsolicited response will be

generated.

DNPNET.CONFIG.DNP3_Ser

ver.Class_2_Unsol_Resp_Min

1 to 255 events

Minimum number of events in Class 2 required

before an unsolicited response will be

generated.

DNPNET.CONFIG.DNP3_Ser

ver.Class_3_Unsol_Resp_Min

1 to 255 events

Minimum number of events in Class 3 required

before an unsolicited response will be

generated.

DNPNET.CONFIG.DNP3_Ser

ver.Unsol_Resp_Delay

1 to 32767

milliseconds

Maximum number of 1 millisecond intervals to

wait after an event occurs before sending an

unsolicited response message. If set to 0, only

use minimum number of events.

DNPNET.CONFIG.DNP3_Ser

ver.UResp_Client_Address

0 to 255 retries

DNP destination address where unsolicited

response messages are sent.

DNPNET.CONFIG.DNP3_Ser

ver.AnalogInput_Events_with_t

ime

0 or 1

This parameter sets if the analog input events

generated by the module will include the date

and time of the event. If the parameter is set to

0, the default is set to no time data. If the

parameter is set to 1, the default object will

include the time of the event.

DNPNET.CONFIG.DNP3_Ser

ver.Events_Require_Time_Sy

nc

0 or 1

This parameter is used to determine if events

will be generated by the server module when

its time is not synchronized from a client. If the

parameter is set to 1, no events will be

generated until the module's time has been

synchronized. If the parameter is set to 0,

events will always be generated.

DNPNET.CONFIG.DNP3_Ser

ver.Initialize_DNP_Output_Dat

abase

0 or 1

This parameter determines if the module will

request data from the processor to initialize the

DNP database output data areas. If this option

is utilized, ladder logic is required to send the

requested blocks from the processor to the

module.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 139 140

Comentários a estes Manuais

Sem comentários