Prosoft-technology MVI56E-DNPNET Manual do Utilizador descarregar pdf (Página 26)

Contents MVI56E-DNPNET ♦ ControlLogix Platform

User Manual DNPNET Ethernet Client/Server Communication Module

Page 26 of 140 ProSoft Technology, Inc.

February 13, 2015

1 If you are not already online with the processor, open the Communications menu, and

then choose DOWNLOAD. RSLogix 5000 will establish communication with the processor.

You do not have to download through the processor's serial port, as shown here. You

may download through any available network connection.

2 When communication is established, RSLogix 5000 will open a confirmation dialog box.

Click the DOWNLOAD button to transfer the sample program to the processor.

3 RSLogix 5000 will compile the program and transfer it to the processor. This process

may take a few minutes.

4 When the download is complete, RSLogix 5000 will open another confirmation dialog

box. If the key switch is in the REM position, click OK to switch the processor from

PROGRAM mode to RUN mode.

Note: If you receive an error message during these steps, refer to your RSLogix documentation to interpret and

correct the error.

1.8.1 Configuring the RSLinx Driver for the PC COM Port

If RSLogix is unable to establish communication with the processor, follow these steps.

1 Open RSLinx.

2 Open the COMMUNICATIONS menu, and choose CONFIGURE DRIVERS.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 139 140

Sem comentários

Prosoft-technology MVI56E-DNPNET Manual do Utilizador Página 26