Prosoft-technology MVI56E-LDM Manual do Utilizador Página 14
- Página / 264
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Preparing the MVI56E-LDM Module ControlLogix Platform ♦ "C" Programmable
Developer's Manual Linux Application Development Module
Page 8 of 264 ProSoft Technology, Inc.
March 12, 2014
Port 1
Port 2
2.4.1 Setup Jumper - MVI56E
The Setup Jumper acts a write protection for the module's firmware. In "write-
protected" mode, the setup pins are not connected which prevents the module's
firmware from being overwritten.
The module is shipped with the Setup Jumper OFF. If you need to update the
firmware or run a module rescue (recovery), apply the setup shunt over both
pins.
2.4.2 Port 1 and Port 2 Jumpers MVI56E
These jumpers, located at the bottom of the module, configure the port settings
to RS-232, RS-422, or RS-485. By default, the jumpers for both ports are set to
RS-232.
2.5 Setting Up a Connection with the Module
If you have not already done so, please install and configure your ControlLogix
processor and power supply. Refer to the Rockwell Automation product
documentation for installation instructions.
Warning: You must follow all safety instructions when installing this or any other electronic
devices. Failure to follow safety procedures could result in damage to hardware or data, or even
serious injury or death to personnel. Refer to the documentation for each device you plan to
connect to verify that suitable safety procedures are in place before installing or servicing this
device.
After verifying proper jumper placement, insert the module into the ControlLogix
chassis. Use the same technique recommended by Rockwell Automation to
remove and install ControLogix modules.
- MVI56E-LDM 1
- Your Feedback Please 2
- Warnings - MVI56E-LDM 2
- Contents 5
- 1 LDM Introduction 10
- In This Chapter 12
- 2.1 System Requirements 12
- 2.2 Package Contents - LDM 13
- 2.4.1 Setup Jumper - MVI56E 14
- telnetd file 20
- 2.8 Module Rescue 27
- 3 Development Environment 29
- 3.2 Using Eclipse 33
- 3.2.1 Building a Project 33
- python createimage.py 36
- 4.1 API Library - MVI56E 39
- 4.1.1 Header File 39
- 4.1.2 Sample Code 39
- 4.3 CIP API Functions 42
- 4.4 Backplane Device Driver 42
- 4.5 Sample Code 44
- 4.10 Sample Tutorials 51
- 4.11 Ethernet Sample 52
- 4.12 Serial Sample 55
- 4.13 Led_Sample 56
- 4.14 Backplane_Sample 57
- 4.15 Tag_Sample 59
- 4.16 Sample Applications 61
- 5 CIP API Functions 76
- OCXcip_Open 79
- OCXcip_OpenNB 80
- OCXcip_Close 83
- 5.2 Object Registration 85
- OCXcip_RegisterAssemblyObj 85
- OCXcip_UnregisterAssemblyObj 88
- OCXcip_RegisterFatalFaultRtn 90
- OCXcip_RegisterResetReqRtn 92
- 5.4 CIP Callback Functions 94
- 5.5 Connected Data Transfer 105
- OCXcip_WriteConnected 105
- OCXcip_ReadConnected 107
- OCXcip_ImmediateOutput 109
- OCXcip_WaitForRxData 111
- 5.6 Tag Access Functions 116
- OCXcip_AccessTagData 116
- OCXcip_CreateTagDbHandle 120
- OCXcip_DeleteTagDbHandle 121
- OCXcip_SetTagDbOptions 122
- OCXcip_BuildTagDb 125
- OCXcip_TestTagDbVer 127
- OCXcip_GetSymbolInfo 129
- OCXcip_GetStructInfo 132
- OCXcip_GetStructMbrInfo 135
- OCXcip_GetTagDbTagInfo 138
- OCXcip_AccessTagDataDb 141
- 5.7 Messaging 144
- OCXcip_GetDeviceIdObject 145
- OCXcip_GetDeviceICPObject 148
- OCXcip_GetDeviceIdStatus 151
- OCXcip_GetExDeviceObject 155
- OCXcip_GetWCTime 158
- OCXcip_SetWCTime 162
- OCXcip_GetWCTimeUTC 165
- OCXcip_SetWCTimeUTC 169
- 5.8 Miscellaneous Functions 172
- OCXcip_GetIdObject 173
- OCXcip_SetIdObject 175
- OCXcip_GetActiveNodeTable 177
- OCXcip_MsgResponse 179
- OCXcip_GetVersionInfo 182
- OCXcip_GetUserLED 184
- OCXcip_SetUserLED 186
- OCXcip_GetModuleStatus 188
- OCXcip_SetModuleStatus 190
- OCXcip_GetLED3 192
- OCXcip_SetLED3 194
- OCXcip_ErrorString 196
- OCXcip_SetDisplay 198
- OCXcip_GetDisplay 200
- OCXcip_GetSwitchPosition 202
- OCXcip_GetSerialConfig 204
- OCXcip_Sleep 207
- OCXcip_CalculateCRC 209
- OCXcip_SetModuleStatusWord 211
- OCXcip_GetModuleStatusWord 213
- 6 Cable Connections 215
- 6.3 RS-422 218
- 6.4.1 RS-485 and RS-422 Tip 219
- 7.2.1 Returning Any Product 221
- 7.3 LIMITED WARRANTY 223
- 7.3.8 No Other Warranties 229
- 7.3.9 Allocation of Risks 229
- 7.4 Open Source Licensing 230
- 7.5 GNU Public License 231
- 7.6 Eclipse Public License 245
- 7.7 Python Public License 251
- 7.8 GCC Public License 257
- 8 Glossary of Terms 260
Manuais e produtos relacionados com Transmissão Prosoft-technology MVI56E-LDM
(55 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.114 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais