Prosoft-technology 5201-DFNT-104S Manual do Utilizador Página 130
- Página / 157
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
104S v2 ♦ ProLinx Gateway Reference
(Firmware v2.xx) Protocol Manual
Page 130 of 157 ProSoft Technology, Inc.
March 19, 2010
Process information in control direction
(Station-specific parameter, mark each Type ID 'X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
⌧ <45> := Single command C_SC_NA_1
⌧ <46> := Double command C_DC_NA_1
⌧ <47> := Regulating step command C_RC_NA_1
⌧ <48> := Set point command, normalized value C_SE_NA_1
⌧ <49> := Set point command, scaled value C_SE_NB_1
⌧ <50> := Set point command, short floating point value C_SE_NC_1
<51> := Bitstring of 32 bit C_BO_NA_1
⌧ <58> := Single command with time tag CP56Time2a C_SC_TA_1
⌧ <59> := Double command with time tag CP56Time2A C_DC_TA_1
⌧ <60> := Regulating step command
with time tag CP56Time2A C_RC_TA_1
⌧ <61> := Set point command, normalized value
with time tag CP56Time2A C_SE_TA_1
⌧ <62> := Set point command, scaled value
with time tag CP56Time2A C_SE_TB_1
⌧ <63> := Set point command, short float value
with time tag CP56Time2A C_SE_TC_1
<64> := Bitstring of 32 bit with time tag CP56Time2A C_BO_TA_1
Either the ASDUs of the set <45>-<51> or of the set <58>-<64> are used.
System information in monitor direction
(Station-specific parameter, mark "X" if used)
⌧ <70> := End of initialization M_EI_NA_1
System information in control direction
(Station-specific parameter, mark each Type ID 'X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in
both directions)
⌧ <100> := Interrogation command C_IC_NA_1
⌧ <101> := Counter interrogation command C_CI_NA_1
⌧ <102> := Read command C_RD_NA_1
⌧ <103> := Clock synchronization command C_CS_NA_1
⌧ <105> := Reset process command C_RP_NC_1
⌧ <107> := Test command with time tag CP56Time2a C_TS_TA_1
- 104S v2 1
- All ProLinx 2
- Products 2
- Your Feedback Please 3
- ProSoft Technology 3
- Product Documentation 3
- Contents 5
- 1 Start Here 9
- 1.2.1 Using the Online Help 10
- 2 Configure the Gateway 13
- 2.1.1 [SNTP CLIENT] 14
- 2.1.2 [IEC-870-5-104] 16
- O (0) or YES (1) 17
- ES or NO 20
- or more 21
- ONE, 1 = CP24, or 2 = CP56 23
- ES or NO 27
- 2.1.5 [M_SP_NA_1 104] 29
- 2.1.6 [M_DP_NA_1 104] 30
- 2.1.7 [M_ST_NA_1 104] 30
- 2.1.8 [M_ME_NA_1 104] 30
- 2.1.9 [M_ME_NB_1 104] 31
- 2.1.10 [M_ME_NC_1 104] 31
- 2.1.11 [M_IT_NA_1 104] 32
- 2.1.12 [C_SC_NA_1 104] 32
- 2.1.13 [C_DC_NA_1 104] 33
- 2.1.14 [C_RC_NA_1 104] 33
- 2.1.15 [C_SE_NA_1 104] 34
- 2.1.16 [C_SE_NB_1 104] 34
- 2.1.17 [C_SE_NC_1 104] 35
- 2.1.18 Group Codes 36
- 2.2 CommonNet Data Map 38
- 2.2.1 From Address 39
- 2.2.2 To Address 39
- 2.2.3 Register Count 39
- 2.2.4 Swap Code 39
- 2.2.5 Delay Preset 40
- OWNLOAD dialog box opens 41
- OWNLOAD button 41
- Implementation 43
- 3.1 Module Address 44
- 3.1.1 IP Address 44
- 3.1.2 Common ASDU Address 46
- 3.3 Using Monitor Points 49
- 3.3.1 Monitor Data Transfer 50
- Example - Mode A 54
- D 03/26/2004 00:00:00 55
- H 03/25/2004 19:00:00 55
- M 03/25/2004 18:08:00 55
- Example (C_SC_NA) 63
- 3.4.1 Control Data Transfer 64
- 3.5 Data Communication 70
- 3.5.1 Group Communication 70
- 3.5.2 STARTDT & STOPDT 72
- 3.5.3 TESTFR Requests 73
- 3.6 Events 75
- 3.6.1 Deadbands 76
- Example: 78
- 3.6.3 Time Information 83
- CHECK DELAY TIME 84
- 3.6.5 Event Priority 87
- 3.6.6 SNTP Support 88
- 3.7 Sequence Flag 89
- 4.1.1 Required Hardware 91
- IAGNOSTICS 92
- IAGNOSTICS dialog box 92
- to open the Main Menu 93
- 4.1.3 Navigation 94
- 4.1.4 Database View Menu 97
- to open the IEC-870-5-104 100
- 4.1.6 Network Menu 102
- to return to the Main Menu 103
- 4.2 LED Indicators 104
- 5 Reference 105
- 5.2.1 Introduction 109
- 5.2.2 Configuration 109
- Word Offset Description 110
- 5.2.3 Command Block List 111
- 5.3 SNTP Support 123
- 5.3.1 SNTP Status Data 123
- 5.5 Command Qualifiers 126
- 5.6 Parameter Qualifiers 127
- 5.7.1 System or device 128
- 5.7.2 Application Layer 128
- In This Chapter 138
- Monitor Database 143
- Address 143
- Require Select 143
- 5.8.4 C_RC_NA_1 Form 145
- 6.2.1 All Product Returns: 148
- 6.3 LIMITED WARRANTY 150
- 6.3.8 No Other Warranties 153
- 6.3.9 Allocation of Risks 153
Manuais e produtos relacionados com Transmissão Prosoft-technology 5201-DFNT-104S
(56 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.149 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais