ProSoft Technology inRA-x ILX34-AENWG Guia de Configuração descarregar pdf (Página 21)

Procedures ILX34-AENWG ♦ POINT I/O Platform

Setup Guide Wireless Point I/O Adapter

ProSoft Technology, Inc. Page 21 of 79

July 31, 2009

3.2.5 Connect Power to the Adapter

The ILX34-AENWG adapter requires an external source of DC voltage. The DC

source voltage should be 24V nominal, with a range of 10V to 28.8V. Refer to the

following illustrations for wiring information.

Caution: Do not connect 120/240V ac power to this supply.

Warning: If you connect or disconnect wiring while the field-side power is on, an electrical arc can

occur. This could cause an explosion in hazardous location installations.

Be sure that power is removed or the area is nonhazardous before proceeding.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 78 79

Sem comentários

ProSoft Technology inRA-x ILX34-AENWG Guia de Configuração Página 21