Prosoft-technology AN-X2-SQD Manual do Utilizador descarregar pdf (Página 10)

Page 4 AN-X2-SQD-MAS June 2013

Installation

Prevent Electrostatic Discharge

The module is sensitive to electrostatic discharge.

WARNING!

Electrostatic discharge can damage integrated circuits or

semiconductors. Follow these guidelines when you handle the module:

• Touch a grounded object to discharge static potential

• Do not touch the connector pins

Power

AN-X requires DC power input from 12 to 24 VDC

Left to right the pins on the power connector are chassis ground, negative voltage and

positive voltage. Pin 1 is closest to the Ethernet connector.

The chassis ground should be connected.

Power consumption internally is 225 mA @ 12VDC or 110 mA @ 24VDC.

The part number for the power connector is Phoenix MSTB 2.5/3-ST-5.08

Remote I/O Cabling and Termination

Refer to the Square D Instruction Bulletin # 30598-247-01D2 Local/Remote Interface

Class 8030 Types CRM-210, 211, 220, 222 for detailed information on remote I/O

cabling and installation.

The module has a 5-pin Phoenix connector for connection to the remote I/O network.

The part number for the remote I/O connector is Phoenix Contact MSTB 2.5/5-ST-5.08

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 50 51

Sem comentários

Prosoft-technology AN-X2-SQD Manual do Utilizador Página 10