Prosoft-technology 5201-MNET-ASCII Manual do Utilizador descarregar pdf (Página 51)

MNET ♦ ProLinx Gateway Diagnostics and Troubleshooting

Modbus TCP/IP Interface Module Driver Manual

ProSoft Technology, Inc. Page 51 of 78

September 1, 2010

6 0064 Invalid Float Start value (<0)

7 0128 Invalid Float Offset value

8 0256 Reserved

9 0512 Reserved

10 1024 Reserved

11 2048 Reserved

12 4096 Reserved

13 8192 Reserved

14 16383 Reserved

15 -32768 Reserved (Signed Integer value shown)

Registers 6008 and 6009 contain information about the most recent

communication errors. The Current Error (6008) will have a non-zero value if the

currently executing Client command experiences an error. The Last Error (6009)

will store the most recent non-zero value error code that was reported by the

Client the last time it experienced an error. Note that this value is retentive. This

reset, cold-boot, or warm-boot operation. Therefore, any value you see here

may indicate an error that could have occurred at any time since the module was

last restarted and may not indicate a current or recent error. For details on error

codes, see MNET Client Command List Error Data.

3.3.2 MNET Server Port 2000 Status Error Locations

The following table lists the status error locations for MNET Server Port 2000

errors.

Internal Database Address Description

6200 Number of Command Requests

6201 Number of Command Responses

6202 Number of Command Errors

6203 Number of Requests

6204 Number of Responses

6205 Number of Errors Sent

6206 Number of Errors Received

6207 Configuration Error Word

6208 Current Error Code

6209 Last Error Code

Refer to the Error Codes section in this manual to interpret the status/error codes

present in the data area.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 77 78

Sem comentários

Prosoft-technology 5201-MNET-ASCII Manual do Utilizador Página 51