ProSoft Technology RLXIC-SG Manual do Utilizador Página 100
- Página / 136
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
RLXIC-SG ♦ Intelligent Cellular Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM User Manual
Page 100 of 136 ProSoft Technology, Inc.
May 29, 2009
Vn
Command Response Mode.
n=0 : Terse (numeric) command responses
n=1 : Verbose command responses (Default).
Xn
Extended Call Progress Result mode.
n=0 : Turn off extended result codes (Default).
n=1 : Turn on result codes. This adds the text 19200 to the CONNECT
response.
&Cn
Set DCD mode.
n=0 : Always assert DCD.
n=1 : Assert DCD when in a data mode (UDP, TCP, PPP, or SLIP) (Default).
n=2 : Assert DCD when the modem has network coverage.
&Dn
Set DTR mode.
n=0 : Ignore DTR, same effect as HW DTR always asserted (same as
S211=1).
n=2 : Use hardware DTR (same as S211=0).
&Sn
Set DSR mode.
n=0 : Always assert DSR (Default).
n=1 : Assert DSR when in a data mode (UDP, TCP, PPP, or SLIP) (Default).
n=2 : Assert DSR when the modem has network coverage.
Tip: S211 can also be used to request that DSR is always asserted. If S211 is set to 3, and &S is
changed to a non-zero value, S211 will be changed to 1.
\APPP
Set modem operation to PPP mode. Cannot be configured in AceManager.
\ASLIP
Set modem operation to SLIP mode. DTR must be asserted (&D0 or S211=1).
Cannot be configured in AceManager.
- RLXIC-SG 1
- Important Notice 2
- Safety and Hazards 2
- Limitation of Liability 2
- Patents 3
- Your Feedback Please 3
- Contents 5
- 1.1 ALEOS™ 7
- 1.2 AceWare™ 8
- 1.2.1 Modem Doctor 9
- 1.4 GSM 11
- 1.4.1 GPRS 11
- 2 Specifications 13
- 2.2 Interface Port Pin-Outs 15
- 2.2.1 Serial Port 15
- 2.3 Power Connector 15
- 3.1 Installing the SIM 17
- 3.1.1 Before you start 17
- 3.1.2 Opening the Case 18
- 3.1.4 Insert the SIM 18
- 3.2 Configuring the APN 19
- 3.2.1 Start AceManager 19
- 3.2.2 Connect to the Modem 19
- 3.2.3 Enter the APN 20
- 4.1 Connecting to Power 24
- 4.3 Indicator Lights 25
- 4.3.1 RSSI LED Ranges 25
- 4.3.2 Light Patterns 26
- 4.4 Mounting 26
- 5 Configuring your RLXIC-SG 29
- 5.1.1 Start AceManager 30
- ALUE column 31
- 5.2 Using Templates 32
- OAD button on the toolbar 33
- EMPLATE 35
- ADIOLINX 36
- 5.3.1 AT Commands 38
- 6.2.1 Set the Port Type 42
- TART > CONTROL PANEL 44
- YSTEM icon 44
- ETWORK ADAPTERS 45
- in front of MODEMS 46
- 2332 by default) 49
- Utility 50
- 7.1.1 Basic Modes 51
- 7.1.2 Serial Modes 52
- 7.1.3 Data Communication 52
- 7.2 Basic Modes 52
- 7.2.1 Start up Mode 52
- 7.2.2 AT Mode 53
- 7.2.3 PassThru Mode 54
- 7.2.4 Telnet Mode 55
- 7.3 Serial Modes 55
- 7.3.1 PPP 55
- 7.3.2 SLIP 56
- 7.3.3 UDP Auto Answer 57
- 7.3.4 TCP and TCP Pad 59
- 7.3.5 Hybrid Mode 59
- 7.4 Data Communication 60
- 7.4.2 Basic Routing 62
- 7.5 Keepalive 65
- 7.5.1 Configuring Keepalive 65
- 8 IP Manager 67
- 8.3 Dynamic Names 69
- 10 16992 bytes 70
- 30 5664 bytes 70
- 60 2832 bytes 70
- 500 339.84 bytes 70
- 8.4.2 Eairlink.com 71
- 8.5 Understanding DNS 71
- 8.5.1 Configuring DNS 71
- 9 Configuring Modbus/BSAP 73
- 9.1.5 Modbus TCP/IP 74
- 9.1.6 RLXIC Modbus on UDP 74
- ISC in the side menu 75
- DDR LIST 76
- YNAMIC IP to be 76
- 9.3.1 Configure the ports 77
- 10.1.2 SNMP Traps 81
- 10.2 SNMP Configuration 82
- 10.2.1 Listening Port 82
- 10.2.2 Security Level 82
- 10.2.4 Trap Destination 83
- 10.2.5 Community String 83
- 10.3.1 Display Responses 87
- 10.3.2 Product ID 87
- 11 Configuration Commands 89
- 11.2 Status 91
- 11.3 Common 93
- 11.3.1 Misc (Miscellaneous) 93
- 11.3.2 Serial 97
- 11.3.3 TCP 102
- 11.3.4 UDP 104
- 11.3.5 DNS 106
- 11.3.6 Dynamic IP 107
- 11.3.7 PPP/Ethernet 109
- 11.3.8 PassThru 111
- 11.3.9 SMTP 112
- 354 = send in progress 113
- 250 = sent ok 113
- 11.3.10 Other 114
- 11.3.11 Firewall 117
- 11.3.12 Port Forwarding 119
- 11.4 Logging 120
- 11.5 Telemetry/Addr List 121
- 11.5.1 Addr List 122
- 11.6 Edge/HSDPA 123
- In This Chapter 125
- 12.2.1 All Product Returns: 126
- 12.3 LIMITED WARRANTY 127
- 12.3.8 No Other Warranties 131
- 12.3.9 Allocation of Risks 131
Manuais e produtos relacionados com Redes ProSoft Technology RLXIC-SG
Redes ProSoft Technology RLXIC-SG Manual do Utilizador
(146 páginas)
(146 páginas)
Redes ProSoft Technology PTQ-LNG Manual do Utilizador
(103 páginas)
(103 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais